Category Archives: CNC

Goodbye, Matsuura…

Milwaukee Makerspace has a lot of equipment, and sometimes we get things that don’t quite work, and we try hard to get them working. We often succeed, but sometimes we decide it’s better to move on…

With that said, we’re looking to sell our Matsuura RA1F Vertical Machining Center, which is known as the “Red Dragon”.

It’s not currently running, but it was working months ago. Ultimately we decided that it would take too much work to get it into good shape for a makerspace, so selling it off as a whole, or in parts, will help fund a new CNC milling machine which is smaller and more suited to our needs.

Goodbye, Matsuura…

If you’ve never used a VMC this probably isn’t for you, but if you really want a challenge, or want it for parts (and there are some very expensive parts in it) you might get a nice deal. Maybe you’ve already got one and need spare components? Perfect!

You can check out the notes we’ve made about the Red Dragon over on our Matsuura wiki page. If you’ve got questions, post a comment or get in touch with us.

Goodbye, Matsuura…

Leafing with the Mogul

Before #1: Your basic 3/8″ plywood

Before #2: My front door, in need of paint, some aesthetic happiness, a fixed doorhandle, and summer. My desire to add a little decoration to the door is, in part, what led me to the Makerspace. I had an idea for panels to go on either side of the door, but no equipment for making what was in my head. When I saw that the Makerspace had cnc routers…

Leafing with the Mogul

 

IN THE MIDDLE

I took photos of leaves from the oak tree in our yard:

Leafing with the Mogul

I traced the leaves in Illustrator, and — by looking at the structure of the tree — made my initial design. I exported the file into svg (with hints from Shane), and Ed helped me use Cambam to convert the svg file into the gcode that the Mogul desires.

Leafing with the Mogul

After generating the gcode, we cut the first panel. For me, watching the cutting was like Christmas: exciting — while for Ed, stepping me through the process, this must have been like a long slooooooooow Christmas, watching the design appear through the three passes the router bit made to cut each (complicated) path. (In truth, Ed’s patience and help were the real Christmas present for me.)

Leafing with the Mogul

This panel was an experiment for me, to learn about how thin and delicate the connecting pieces could be in such cutting. And I learned: what you cannot see in the picture above is how two of the leaves broke off quickly.

In the next Illustrator file I made (which I then cut on the Mogul with Steve Pilon’s also very generous and patient help), the leaves overlap and made their stems thicker. You might be able to see this in the final picture below, which shows the panels painted and mounted. Merry Christmas!

 

THE END

Leafing with the Mogul

New machines are about to come online!

In addition to making things, many of our members like making machines that make things! We should have a functioning vacuum former, a 4’x8′ CNC Router, and a 4’x8′ CNC Plasma Cutter in the the next couple of months. While the vaccum former was acquired from an auction, the other two have been built at the makerspace over the last year and a half from scavenged materials. The frame and the rails for the plasma cutter were used in a perfume bottler in a past life. We can’t wait to see what our members will make from these awesome machines!

A few pictures of the above mentioned equipment can be found below:

New machines are about to come online!

New machines are about to come online!

New machines are about to come online!

New machines are about to come online!

New machines are about to come online!

New machines are about to come online!

New machines are about to come online!